Hi-Tech Industries HT-230 Vinyl, Plastic & Carpet Dye Dye for Car Interiors:Rejuvenate or change the color of your car carpet. leather, upholstery, floor mats, or vinyl and plastic trim, and moldings with our Car Carpet Dye. You will have a fade-resistant finish that will not split, crack, peel or rub off and the surface grain simulation will show through. Using Automotive Car Carpet Dye protects your car interior while making it look-like new again in just a few steps. A True Dye not Paint:If you use paint, instead of dye, on your automotive interior, eventually, the paint on the leather, vinyl and plastic parts will split, crack, and peel. The carpet and leather will become hard and lose it flexibility. Instead, use our leather, carpet, vinyl, and hard plastic dye for professional looking results. The leather and carpet will remain soft and flexible. Dye will not rub off with repeated use. The grain simulation will continue to show through. Trouble Free Spray Pattern:Our automotive dye aerosol cans have a fan-shaped spray pattern for maximum coverage. It is easy to change the spray pattern from vertical to horizontal or vise-versa by simply twisting the nozzle. The dye dries in approximately 15 minutes. Versatile Uses:Use confidently to safely restore, renew, and rejuvenate automotive carpet, leather, vinyl, and plastic. This Auto Carpet Dye can also be used to dye PVC, Fiberglass, Metal, ABS Plastic, Lexan, Acrylic, Polycarbonate, Polypropylene, and Recycled Plastics. Specifications: Aerosol Spray Can Net Weight: 11 oz. Dries to the touch in 90 seconds and adheres within 10 minutes, approximate. Appropriate coverage is 7 square feet, but may vary, depending on conditions. UV Enhanced Stability California / OTC VOC Compliant How to Dye Automotive Carpet, Leather, Vinyl, and Plastic Vacuum and thoroughly clean the carpet, leather, vinyl, or plastic to remove built-up polish, dirt, or silicones. Protect any area with a painter cloth, heavy paper, or painter tape that you do not want to dye the surface. Before beginning to spray the area, shake the spray can vigorously for 2 minutes. You will hear the metal ball moving as you shake it. Adjust the spray pattern to horizontal or vertical, whichever is desired. Hold the can vertical and about 12 inches from the surface. Continually move the aerosol spray can from side to side using light, even strokes. Apply 2-3 additional mist coats, if desired. Wait approximately 10 minutes between coats. Never spray in a heavy pattern. Stand back and admire your new look! You will be amazed at your rejuvenated car interior. Professional Tips: It is important to blend the new color dye with the existing color. The snorkel type nozzle has an adjustable spray pattern that provides accurate coverage while diminishing the possibility of over spraying. Best results are obtained with the temperature over 60 degrees F. For carpet: brush the carpet fibers so they stand up as much as possible. This allows the dye to penetrate the deep fibers better. Test a small, inconspicuous area first for compatibility and color matching.
